Smart WiFi Electricity Meter SMTONOFF 220V 63A

Overview

This all-in-one intelligent device is applied to single-phase AC 230V 50/60Hz rated current 63A circuits in residential, commercial and industrial buildings with 2.4G WiFi, to measure the electricity consumption

as an option; to remotely control and set the protection of over/under voltage, overcurrent, residual current (leakage), high

temperature through the mobile APP at anytime and anywhere; and automatically re-enable after the protection conditions are restored to achieve maintenance-free

management; programmable time management to make your planned life efficient and save electricity, and share the device with your family or stakeholders in your team. It also supports local manual control without WiFi and voice control via AI speaker, such as Amazon Alexa, Google Assistant, Yandex Alice, etc.

Main Features

Poles: Single-phase

Rated Voltage: 2P AC230V (overvoltage/undervoltage protection adjustable);

Rated Current: 1~63A adjustable;

Frequency: 50/60Hz;

Power: Resistive load ≤13kW, Inductive load ≤6kW;

Self-consumption: <2W;

Mounting: 35mm DIN rail;

Functional Features

01. Four control options:

- Remote control anytime, anywhere (mobile APP, Tuya Smart, Smart Life)

- Voice control (AI speaker, Alexa, Google, Alice, ...)

- Time control (programmable schedule)

- Manual control (by keys and knob)

02. Real-time monitoring of electricity consumption and statistics on the phone (A, V, mA, kW, kWh, ℃);

03. Prepaid metering mode is available as an option by the switch;

04. Adjustable protection of over/under voltage, over current, residual current (leakage), high temperature;

05. Over current protection: 1~63A/100A adjustable, 63A by default;

06. Over voltage protection: 275V by default;

07. Under-voltage protection: 150~190V adjustable, 170V default;

08. Residual current (leakage) protection: 10~100mA adjustable, 50mA default;

09. Temperature alarm protection: 50~90℃ adjustable, 60℃ default;

10. Temperature alarm protection: 60~100℃ adjustable, 70℃ default;

11. Recovery delay time: adjustable from 5s to 90s, default 30s (manual setting on the device by keys, not in the APP);

12. 2-pin grounding wiring for over-voltage protection, 4-pin three-phase four-wire solves the problem of three-phase imbalance;

13. Local manual setting on the device (no need to support WiFi);

14. Automatically re-enable after protected conditions are restored;

15. Programmable time schedule in the APP;

16. Share the device with family members or your team;

Note: If the protection device is triggered 3 times due to leakage, it will not automatically re-enable until the user fixes the problem to ensure safety!